XONTEL XT-23G User Manual Download

Page: 51 / 166

Network Setting

XT-23G IP Phone supports IPv4

、

IPv6

、

IPv4&IPv6.They have three modes of Network: DHCP, Static,

and PPPoE. The default mode is DHCP, it will obtain IP address and other information automatically.

If your phone cannot contact a DHCP server for any reason, you need to configure a static IP address

manually.

When switch DHCP, Static IP and PPPoE to each other, or change the Static IP on Web interface, it

will show the warning of restart as following.

IPv4

If you set IP Mode to IPv4, IP phone will use IPv4 address. IPv4 has three network modes: DHCP, Static,

and PPPoE

To configure IPv4 via Phone interface:

1. Press Menu

→

Settings

→

Advanced Setting (password:

xontel

)

→

Network

→

WAN Port

→

IP Port Mode.

2. Press

to change the IP Port Mode.

3. Press

or Save soft key to save the configuration.

Summary of Contents for XT-23G







































































































































































Search results

Summary of Contents for XT-23G

Reviews:

Related manuals for XT-23G

Brands by name

Popular brands

XONTEL XT-23G, User Manual

Search results

Summary of Contents for XT-23G

Reviews:

Related manuals for XT-23G

Brands by name

Popular brands