XONTEL XT-23G User Manual Download

Page: 39 / 166

To delete the wallpaper via Web interface:

1. Click Setting

→

Preference

2. Select the desired wallpaper to delete.

3. Click

to save the setting.

Note:

System wallpaper (Wallpaper1-Wallpaper6) cannot be deleted and only color IP Phones support

uploading wallpaper.

Screen Saver

There are three types of screen saver: Time & Logo, Photo Switch and Static Photo.

Time & Logo:

When the screensaver works, it will show Time and logo in turns.

Photo Switch:

All screensaver pictures display one by one.

Static Photo:

Only the selected picture will display as screensaver.

Text logo:

It works with the

Time & Logo,

when enter the value, it will display the time and the entered

value in turns.

To enable screen saver via Phone interface:

1. To

press Menu → Display → Screensaver...

2. Press

and

or press Switch soft key to Choose the Time-out as 1 min or

2/5/10/30 minute, then press the Save button.

Summary of Contents for XT-23G







































































































































































Search results

Summary of Contents for XT-23G

Reviews:

Related manuals for XT-23G

Brands by name

Popular brands

XONTEL XT-23G, User Manual

Search results

Summary of Contents for XT-23G

Reviews:

Related manuals for XT-23G

Brands by name

Popular brands