XONTEL Plus PBX, User Manual

Page: 26 / 118

5.2.3
PSTN
On the Status

PSTN interface, information of FXO is shown. Green color means available or registered, while red
color means abnormal, unregistered or prohibited.
If ‘SIP Register Status’ is ‘Registered’, it means FXO has been registered to SIP server on the Trunk

SIP/FXO
interface respectively.
Belong
To
Parameter Explanation
FXO
Module Status There are two module statuses: Ready and Config Failed
Parameter Status There are two parameter statuses: OK and error
SIP Register Status There are two SIP register statuses: Registered and Unregistered
Hook State There are two hook states: Onhook and Offhook
Line State There are two hook states: Online and Offline
5.2.4
DHCP Client List
XonTel Plus has a built-in DHCP server. When the DHCP server is enabled, it can assign IP addresses to the clients
connected to it.
On the Status

DHCP Client List interface, information of DHCP clients connected to the XonTel Plus PBX, such
as client name, Mac address and IP address, is shown.