XONTEL Plus PBX User Manual Download Page 24

Page: 24 / 118

Auto Refresh Button

The button can be enabled or disabled. If it is enabled, the

information on the

Status



Overview/SIP/PSTN/Current Call

interfaces

will be refreshed automatically

User Role

The role of the current user logging into the Web. And the “exit” sign

will pop up when the mouse moves over there. You can log out of the

web from there

5.2

Status

The ‘

Status

’ menu mainly displays all kinds of status information. It includes the following sub-menus: Overview, SIP,

PSTN, DHCP Client List,

Fail2ban, VPN, Parking Lot, Current Call, Call Queue, CDRs, Service, performance and

About.

5.2.1

Overview

Status



Overview

, and the following interface will be displayed. On

the interface, device model, firmware version as well as information about performance are shown, together with

WAN network, LAN network and DHCP server.

Summary of Contents for Plus PBX























































































































Search results

Summary of Contents for Plus PBX

Reviews:

Related manuals for Plus PBX

Brands by name

Popular brands

XONTEL Plus PBX, User Manual

Search results

Summary of Contents for Plus PBX

Reviews:

Related manuals for Plus PBX

Brands by name

Popular brands