background image

EN

Topic: 

Table of contents

4

XOMAX

https://www.xomax.de

!

 Regular temperature

Please make sure that the temperature 
inside the vehicle is not less than 0° C 
and not more than +40° C. 

If it's too cold or too hot inside of the 
vehicle, do not turn the unit on until 
the inside temperature of the cabin 
descends.

!

 Cleaning of the unit

Please keep the unit clean and remove 
the dust from it regularly. Please use for 
that a soft and dry cleaning rag. 
 
Major soilings can be removed carefully 
with the wet cleaning rag. Do not use 
any chemical or alcohol-containing 
detergents to avoid the damage of the 
unit's varnish.

!

 Moisture

To avoid the danger of fire or the 
electric shock do not put the unit in to 
the moist environment (e.g. adverse 
weather conditions, inappropriate wet 
cleaning etc.)

!

 Steering wheel remote cont-

rol connection

Please refer to the operating instruc-
tions of your vehicle for assistance in 
connecting the steering wheel remote 
control.

 

To connect the steering wheel 

remote control, you need a Can-Bus 
adapter for your vehicle. You can buy 
this from a specialist dealer for spare 
parts for your vehicle.

i

      Please only have the steering 
wheel remote control connected by 
a specialist or specialist workshop. 
Connection errors can cause seri-
ous defects in the device and in the 
vehicle electronics.

Defects caused by connection errors 
are not covered by the warranty.

!

Summary of Contents for XM-V418


















Reviews: