background image

17

EN

Thema: 

Playback mode

panel to skip 10 tracks backwards or 
forwards.

Change folder

Press and hold the 

 5 

 or 

 6 

 button on 

the front panel to move to the previous 
or next folder.

Intro function

You can activate/deactivate this function by 
pressing the 

 2/INT 

 button on the front 

panel: only the first 10 seconds of each 

track will be played.

Repeat track

The 

 3/RPT 

 button on the front panel 

activates/deactivates the repeat function. 
If it's on, the current track will be played 
repeatedly.

Random playback

The 

 4/RDM 

 button on the front panel 

activates/deactivates the random playback 
function.  If it's on, all the tracks will be 
played randomly.

ID3 tag (song/interpreter/album)

The "ID3 tag" function allows to view 
the additional track information, e.g. 
name of the current song/of an artist/of 
an album.

Switch to playback mode

As soon as you either plug an USB flash 

drive or insert a micro SD card the 
unit's processor reads the data from the 
storage medium and the unit switches 
to playback mode.

To get to the USB- or SD- mode 
manually press the 

 

?

/SRC 

 button 

several times till the corresponding 
operating mode appears on the screen.

Start the playback

The playback starts automatically as 
soon as you insert the medium (Disc, 

USB flash drive or SD card) or switch to 

one of these modes.

The playback can be paused/resumed 
via 

 

1/

<

 

 

 button on the front panel.

Skip track for-/backwards

To skip to the previous/next track press 

briefly the 

 

8

 

 / 

 

7

 

 button either on the 

front panel.

Rewind / fast-forward

Hold the 

 

8

 

 / 

 

7

 

 button pressed till you 

get to the required passage. Then release 
the button, the playback resumes.

10 tracks skip for-/backwards

Press the 

 5 

 / 

 6 

 button on the front 

Playback mode

Summary of Contents for XM-CDB624























Reviews: