385
Connections to the encrypted port 465 are not supported.
SMTP-Auth login
If authentication with SMTP-Auth is required for using the relay server of your provider,
you can provide the username and password in the corresponding input fields. If you
leave these fields blank, authentication is disabled.
According to the standard, SMTP-Auth is a "hot-to-hop"
authentication. Thus it involves only the two systems directly
connected. In this case the relay server asks the SX-GATE mail
server to authenticate itself and not e.g. the user who wrote
the email. Therefore SX-GATE can only use one specific login
for SMTP-Auth. It is not possible to use different credentials
depending on the sender of the mail.
14.5.5-G
Disclaimer
The boilerplate entered here will be appended to every outbound email, passing SX-
GATE's mail server. The distinction between inbound and outbound email is based on
the values in "Local IP addresses" from menu "Modules > Mail Server > SMTP settings"
on tab "Relay control". Authenticated emails and emails composed with SX-GATE's
webmail client are also outbound.
Manual line-feeds can be used for a basic layout of the boilerplate. When adding the
boilerplate to the contents of an HTML mail, an HTML new-line (<br>) will be inserted
instead. In HTML mails the boilerplate is enclosed by <em> tags. It is possible to
use arbitrary HTML tags to control the layout of the boilerplate. When appending the
boilerplate to a plain text email all HTML tags will be removed (passages between the
characters "<" and ">").
Don't use the characters "<" and ">" in the boilerplate's text.
Otherwise parts may be stripped off unintentional.
