XBOX ONE
30 PLUS
XMOD
Modded Controller
PROGRAMMING RAPID FIRE SPEEDS
The controller can remember up to 5 different Rapid Fire speeds in "shots per second". It’s
important to know that
each video game may have a speed cap.
This cap can be different for every game. If you try to set your Rapid Fire speed
above this cap
, your
gun will actually
shoot slower, or not shoot at all.
Always try starting out at a slower speed and increase your speed in
small intervals.
Start out at a
low speed, then increase it until you feel that the gun is starting to "sputter" or slow down.
At that
point, you are probably reaching the game's speed cap.
Many different factors can affect the performance of your Rapid Fire controller, including your
console, the quality of your Internet connection and whether or not you are the current host of the
match.
To modify any speeds:
●
Set the XMOD Controller
on the speed you want to adjust (1-5).
●
Turn
ALL modes/functions OFF (Hold A+B and Tap Mode button)
●
Hold the
LT+ RT + MODE button simultaneously for 2 seconds
to enter in “Speed Programming”
●
Release the buttons.
After enter in “ Speed Programming”:
●
Tap
A button
to
INCREASE
speed.
●
Tap
B button
to
DECREASE
speed.
●
TAP
the
MODE button
to set it
back to DEFAULT
speed.
●
To
SAVE and EXIT:
Hold the
LEFT Trigger
and Tap the
MODE
button.
You can
TEST your speed
by pushing the RIGHT Trigger
(RT)
at any time.
The LEDS will flash when the
MAXIMUM or MINIMUM
speed are reached.
Repeat the
same actions
to adjust each speed.
Each speed must be
programmed individually.
They can be adjusted from 5 to 30 shots per second.
You can RESET to DEFAULT each speed individually or you can RESET ALL SPEEDS to Factory Settings
just in one action.
