USER MANUAL - STA 16A
___________________________________________________________________________________________________________________________________
www.xmart-ups.com
1701-STA-16 220V- EN
-
2
2. INSTALATION
This product can be installed in a 19" rack cabinet or over a flat surface as well.
In case of installing in a rack cabinet, please below instructions.
1. Install according to above figure.
2. Connect input "A" in input socket "A" in rear panel.
2. Connect input "B" in input socket "B" in rear panel.
4. Connect protected products to STA-16A outlets. Note there are multiple outlets with 10A capacity and 1 outlet with 16A capacity.
3. OPERATION
OPERATION PANEL:
1. Selector for main input:
Selects the preferred input.
2. Preferred Input LED:
Indicates what is the preferred or pre-selected input (A or B)
.
3. Status Input LED: Indicates status for each input
LED A: ON: Input "A" OK
LED A: OFF: Input "A" OFF (no voltage)
LED A: Blinking (intermitent): Input "A" voltage is out of range (low or high input)
LED B: ON: Input "B" OK
LED B: OFF: Input "B" OFF (no voltage)
LED B Blinking (intermitent): Input "B" voltage is out of range (low or high input)
4. Output LED: Indicates what input is connected to the output
LED A: ON: Output connected to input "A"
LED B: ON: Output connected to input "B"
5. Alarm LED: Alarma indicator
6. Alarm Mute
OPERACION:
TURN-ON:
After connecting all input and output cables, just activate input switches A and B to ON position.
SELECTING PREFERRED INPUT:
Select preferred input by button "1" in front panel. Default preferred input is "A".
USER MANUAL - STA 16A
___________________________________________________________________________________________________________________________________
www.xmart-ups.com
1701-STA-16 220V- EN
-
3
4. COMMUNICATION PORTS
USB*: USB communication using dedicated software. Pin 1: VBUS / Pin 2: D- / Pin 3: D+ / Pin 4: GND
RS-232*: Serial communication using dedicated software. Pin 2: TX / Pin 3: RX / Pin 5: GND / Pin 6: +12Vdc
Relays outputs port
*
check
software
manual.
RELAY OUTPUTS PORT
It is used to provide status information about AC inputs and STA-16A situation according to following figure.
Pin 1: Common point.
Pin 2: Close = Output connected to input "B"
Pin 3: Close = Output connected to input "A"
Pin 4: Close = Input "A" OK
Pin 5: Close = Input "B" OK
Pin 6: Close = Device OK
5. TECHNICAL SPECIFICATIONS
ATS 16A - 220V
16A
Capacity / Capacidad (VA):
16A @ 220V (3.500VA)
Input / Entrada
Voltage / Voltaje (VAC)
220/230/240Vac
Range / Rango (VAC)
180 - 258 Vac
Frequency / Frecuencia (Hz)
50 / 60Hz
Max Input Current / Corriente Max:
16 Amps
Inlets / Tomacorrientes de Entrada
2 x IEC C20
Output / Salida
Voltage / Voltaje (VAC)
220/230/240Vac
Power Outlets / Tomacorrientes de Salida
8 x IEC-C13 (10 Amps) + 1 x IEC-C19 (16 Amps)
Protections / Protecciones
Overload & Shortcircuit / Sobrecarga &
Cortocircuito
AC Breaker for each input / Disyuntor AC para cada entrada
Transfer Time / Tiempo de Transferencia
Transfer Time / Tiempo de Transferencia
4 - 8 ms
Size & Weight / Características Físicas
Size / Dimensiones (cm)
330x483x44 mm
Net Weight / Peso Neto (Kg.)
5,0
Gross Weight / Peso Bruto (Kg.)
6,0
Operating Conditions / Ambientales
Temperature / Temperatura
0-40°C
Humidity / Humedad
< 90% (no condensing)
Noise / Ruido
< 40dB