Flying operation
-7-
Prohibited to flight before do not understand the control method of this plane. Pls read this Instruction
and come to understand until your finger can control the Transmitter correctly .
1.Put the model in an open place,and the tail of model face to yourself.
2.Pratice operate the joystick of controller( operate as follows), And repeatedly practice throttle
high / low, left / right aileron, Rudder forward/backward and rudder left /right.
3.simulation flight exercises is very important, please repeat do exercise until skillful, The finger can
control the plane naturally when orders.
Rudder adjustment of plane
Receiver plugs introduction
1. Put into battery for the plane, Aileron/lift Rudder
Vertical rudder Should back to middle. If the rudder
is not in the middle position, By hand rotation of the
adjustment will be adjusted to the middle position
of the rudder.
2. The Motor can not start when you adjust the plane.
Gyro in the state of close. Gyro in the situation of
repairing, can not adjust surface correctly to the
position of middle.
3. Wire spin to the right to shorten the length of
push-pull wire, left spin can be extend length of
push-pull wire.
1. Adjust the steel wire of whole surface, The Transmitter must be close.
Note:
ESC socket
Aileron socket
code key
battery Socket
lifting socket
deirection socket
