TOKINA 10-17 LENS
GRAY ZOOM RING
SHOWING THE
UNLOCKED
POSITION
ROTATE GEAR INTO
LOCKED POSITION
RED
MANTA
GEAR
ORIENT GEAR IN
THE UNLOCKED
POSITION
SLIDE GEAR ONTO
LENS AND PRESS
INTO ZOOM RING
ZOOM RING PROPERLY
LOCATED ON LENS
SLIDE ZOOM RING
ONTO LENS FROM BACK
UNTIL IT STOPS
Thank you for purchasing Xit 404’s Tokina 10-17mm Zoom Ring to use
with our Manta Gears. On the back is our warranty information to help you
prolong the life of this product.
This product is in our Manta Line. The advantage of the Manta Line of
Rings and Gears is that the parts are interchangeable. For example the
Manta Gear fits on all Manta Focus/Zoom Rings as well as our
Manta Teleconverter Extension Rings. This allows you to purchase one
gear that mates with a variety of lenses.
Assembling the Zoom Ring to your Manta Gear
Make sure your lens switch is in auto focus mode. Look at the drawing to
the left and note which end of the lens the Zoom Ring slides onto. Then
follow the instructions below.
1. Slide the Zoom Ring onto your lens from the front of lens until it stops.
2. Slide the Manta Gear on from the back of the lens. Align the white
dot on the Manta Gear with the unpainted red dot on the Focus Ring.
Then press the two parts together. Once the the two parts are fully
mated, while holding the Focus Ring with one hand, and pressing
the red Manta Gear latch with thumb, twist the Gear until the white
dots line up (note: the locked icon). The Manta Gear is now locked
onto the Focus Ring.
Disassembling the Focus Ring
1. Remove the Manta Gear by pressing and holding the latch on the
Manta Gear. Then twist it until the white dot on the Manta Gear is
lined up with unpainted red dot on the Focus Ring (note: the
unlocked icon).
2. Pull the Manta Gear off the lens.
3. Remove the Focus Ring by reversing the steps 1 and 2. above The
white dot and the unpainted red dot will not be lined up after step 2,
allowing you to slide the Focus Ring off your lens.
RED GEAR LATCH
PRODUCT CODE: GM3201TK
Revsion 2.0 - APR2013
www.xit404.com
TOKINA FISHEYE10-17mm 3.5-4.5:2.8 (CANON)
MANTA ZOOM RING ASSEMBLY INSTRUCTIONS
