Jul-21, V1.1
Page
7
/
20
DEVICES
DEVICES
Safety instructions and warnings
The following information must be observed during the
operation of the starter kit:
●
VXL GO is only intended for domestic use. Continuous
operation is not permitted.
●
The container can only be transported when empty. Do
not transport or carry it when filled with water or
washing solution. Empty the container before moving it
using the supplied siphon pump. Do this in multiple
steps if needed.
●
Place the starter kit on a dry, stable, level, heat- and
waterproof surface only. The starter kit may only be used
in a dry, well ventilated indoor environment.
●
Connect the starter kit to a suitable power source (230 V
AC, 50 Hz). Pay attention to not bend the power cord or
pull it when unplugging. Do not use an extension cable
and do use a grounded plug.
●
Do not touch the openings of the heating/stirring rod
while it is in operation.
●
Keep the starter kit away from children and only operate
it supervised. It may only be operated by adults.
●
Do not operate the starter kit if you notice that any of
the parts are defective or missing.
●
The black top of the heating/stirring rod contains the
electronics and must not become wet.
●
The surfaces of the starter kit, as well as the washing
solution, will become hot during operation. Do not heat
the solution bath above 60 °C. Never place your hands
within the solution bath when hot.
●
The VXL GO starter kit and its parts must not be used to
prepare or store food. The VXL support material,
VXL solve and VXL EX are not suitable for consumption.
●
Only water may be used as solvent and only VXL solve or
VXL EX as detergent. Do not use any flammable liquids.
Do not fill the container above the fill level of 10 L. Follow
the dosage recommendation of the VXL solve or VXL EX.
