ECDIS User manual
23
the crew on this route.
Double-click the Leg type unit to enter the voyage type edit, which pops up as shown:
The calculation of the selection of the constant line voyage will be calculated according to
the constant line, and the calculation of the voyage of the large circle will be calculated
according to the route of the big circle. Double-click the voyage unit to enter the voyage
edit as shown:
The angle is the orientation relative to the previous waypoint, and the distance is the
distance from the previous waypoint. Determine the latitude and longitude coordinates
of the waypoint by adjusting the angle and distance.
The total distance is the distance from the first waypoint of the route to the current
waypoint. The part cannot be edited.
The safety distance data is used for route detection and yaw alarms. You can double-click
to edit and input the values according to the route design.
The steering radius is the radius of the route steering arc, and the set value is based on
the steering ability of the actual navigation of the vessel .
2.2.11 Voyage schedule
First load the route, click on the voyage “schedule”, and enter the voyage edit list as
shown:
