OWNER’S/OPERATOR’S MANUAL
7. CONTROLS AND PARTS FUNCTIONS
7- 4
ACCESSORY SOCKET
The accessory socket (1) is attached to the left
side of the dashboard. You can use the
accessory socket to power a trouble light,
spotlight, CB radio, or cell phone etc.
CAUTION
Do not plug in any heat-generating accessory such as an automobile cigarette lighter
because it damages the socket.
To use the accessory socket, start the engine. Then turn the headlights OFF, and
open the accessory socket cap (2).
Be sure the engine is on and the headlights are turned off before using the accessory
socket, otherwise you may drain the battery.
The accessory socket rated capacity is DC 12V. 120 Watt (10A) or less. If you exceed
this limit, you may blow a fuse.
When you are done using an accessory, unplug it, and cover the socket with the cap.
Be careful not to flood this accessory socket when washing your UTV.
ACCELERATOR PEDAL
WARNING
Before starting the engine, check the accelerator pedal to be sure it is operating
smoothly.
Make sure the accelerator pedal fully returns to the idle position as soon as it is
released.
1.Accelerator pedal
Press the accelerator pedal down to increase engine
speed. Spring pressure returns the pedal to the rest
position when released. Always check that the accelerator
pedal returns normally before starting the engine.
