xiQ - Technical Manual Version 1.35
58
3.12.
CBL-MQ-FL-0M1/ CBL-MQ-FL-0M25
Cable FPC MQ Flex-Line, 0.1m/0.25m can be used for connecting xiQ flex line models to carrier board or trough adapter and
standard USB 3.0 cable to the host computer.
figure 3-58, flex cable (gold color)
Cable have marked ends. It is important to connect the end marked “CAM” to the camera and end marked “BOB” to
host or adapter. Swapped orientation leads to nonoperational state. Connecting camera to powered host can cause
destruction of camera. For detaching cable the connector need to be unlocked, otherwise connector soldering may be damaged.
figure 3-59, flex cable ends
3.13.
CBL-USB3FLEX-0M10 / CBL-USB3FLEX-0M25 / CBL-USB3FLEX-0M50
The newer generation of FFC cable with available lengths 0.1m, 0.25m and 0.5m can be used for connecting camera to carrier
board or trough adapter to the host computer. Minimal advised bending radius is 5mm. Cable thickness 0.38mm. This cable is
NOT polarized and either end can be used for the camera or the host.
figure 3-60, flex cable (white color)
