xiMU - Technical Manual Version 2.10
3
1.3.
Standard Conformity
The xiMU cameras MU9Px-MH have been tested using the following equipment:
•
MU-MINIUSB-Adapter
•
A shielded USB 2.0 cable (1.5m)
The xiMU cameras MU181CR-ON have been tested using the following equipment:
•
ADPT-MU-TC-V
•
A shielded USB 3.0 cable (3.0m)
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the
user's authority to operate this equipment.
XIMEA recommends to use the same configuration to ensure the compliance with the following standards:
1.3.1.
CE Conformity
The xiMU MU9Px-MH and MU181CR-ON cameras described in this manual comply with the requirements of the
•
EC EMC Directive 2014/30/EU electromagnetic compatibility of equipment
1.3.2.
For customers in the US: FCC Conformity
The xiMU MU9Px-MH and MU181CR-ON cameras described in this manual have been tested and found to comply with Part 15
of the FCC rules, which states that:
Operation is subject to the following two conditions:
•
This device may not cause harmful interference, and
•
This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for Class A digital device, pursuant to part 15 of the FCC
rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in
a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the users will be required to correct the interference at
their own expense.
You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate
this equipment under above jurisdictions. The shielded interface cable recommended in this manual must be used with this
equipment in order to comply with the limits for a computing device pursuant to Subpart J of Part 15 of FCC Rules.
1.3.3.
For customers in Canada
The xiMU MU9Px-MH and MU181CR-ON cameras comply with the Class A limit s for radio noise emissions set out in Radio
Interference Regulations.
1.3.4.
RoHS Conformity
The xiMU cameras comply with the requirements of the RoHS (Restriction of Hazardous Substances) Directive 2011/65/EU.
