xiJ - Technical Manual Version 0.06
60
Functions
•
to see live image from multiple XIMEA cameras connected
•
control the camera parameters
•
store of camera image and video
•
analyze the image properties
•
histogram and line profile
•
image averaging, image flip/mirror
•
software trigger timer, save/load camera and program settings
•
LUT (Look up table)
•
CamTool allows to operate all connected cameras simultaneously. In this case all controls are layered for the cameras. Basic
controls are placed as tabs in upper part of the window. Image window can be detached from application if needed. Amount of
visible camera controls depend on visibility level which can be set in Edit
Options.
For more information, please, refer to:
https://www.ximea.com/support/wiki/allprod/XIMEA_CamTool
5.4.1.
Control cooling
The Temperature control is part of the "Camera Settings" panel, which is displayed on the right side by default. More complex
temperature monitoring can be displayed in Tools > Temperature Graph.
figure 5-12, Temperature Graph Layout
5.4.2.
Mode settings
In CamTool you can directly access the camera modes with the presets. The UserSetControl is part of the "Camera Settings"
panel, which is displayed on the right side by default. When a User Set is loaded, all parameters specified in it are always set.
For example, the gain value is also reset. This also applies if the already selected mode is set again.
figure 5-13, User Set Control in CamTool
