XIMEA xiJ, Technical Manual

Page: 51 / 84

xiJ - Technical Manual Version 0.06 51
5.2. Connecting the camera
The camera was tested on 2 setups with accessories described in chapter 3. Hardware Specification. That is recommended
setups, where functionality is guaranteed. Using cameras with other controllers and cables may result in suboptimal
performance.
The first one is the direct connection with 1m USB3 cable with power delivery (e.g. 3.9. CBL-U3-P-TC-1M0 ) to the host adapter
( 3.15. USB 3 host adapters ).
The second one is using power injector. In order to correctly connect the camera with the power injector, the below order of
steps must be followed:
6. Connect USB micro-B cable ( 3.10. CBL-U3-1M0 / CBL-U3-3M0 / CBL-U3-5M0 ) to power injector ( 3.12. Power
injector ADPT-PWR-INJ-TC).
7. Connect USB A ( 3.10. CBL-U3-1M0 / CBL-U3-3M0 / CBL-U3-5M0 ) to PC.
8. Connect power cable ( 3.13. Power cable AUX – CBL-MJ-PWR-2M0) and power on.
9. Connect USB type-C cable ( 3.9. CBL-U3-P-TC-1M0 ) to power adapter.
10. Connect USB type-C cable to the camera.
figure 5-1, connecting the components
5.3. XIMEA Software Packages
5.3.1. XIMEA Windows Software Package
XIMEA API Software Package can be installed on: Microsoft Windows 10, Microsoft Windows 8, Microsoft Windows 7 (and
Microsoft Windows 7 Embedded), Microsoft Windows Server 2008 R2.