WARNINGS
Please read this user manual before use.
！
● The user needs to have the relevant professional knowledge when installing or operating the VTX
Product, any improper use may cause potential danger. Please ensure that you have the necessary skills
required to operate radio equipment or operate under the guidance of a professional. Read this manual
carefully before attempting to install The user accepts responsibility for any personal injury and property
damage caused by ignoring the following statements or violating the operating regulations.
● Do not touch the VTX when in use as it will get hot and can cause burns, please mount in a way to
ensure adequate airflow to provide cooling, Follow the wiring diagram to ensure the correct cable and
plug fitments, It is important to install the antenna correctly before powering up the VTX to avoid any
damage to the precision components inside, Do not disassemble, repair or modify this product person-
ally. Contact your dealer for technical support if you have any questions or problems with the product.
●Follow all local radio regulations, a HAM license is required for some channels and power levels, you
may need to notify the local radio regulatory agency before using some frequencies. Ensure you abide
by all local laws and regulations for drones and transmitting power and some frequencies. It is strictly
forbidden to fly in no-fly zones such as Airports, Military Facilities or overcrowded areas.
Specifications
Feature
WIRING DIAGRAM
● LOCK-ON TECH eliminates frequency drift. ● All channel power calibration .
●No frequency sweep, no interference. ●7-36V 6S HV input ,Dual power filter.
POWER LEVEL: PIT-25mW-100mW-200mW-600mW
INPUT VOLTAGE: DC 7-36V (6S LIPO )
VIDEO FORMAT CVBS PAL/NTSC
DIMENSIONS: H 36.5mm* W 36.5mm* D 5.2mm
EXTERNAL CONTROL: SMARTAUDIO
CHANNEL: 37CH(US)
OUTPUT VOLTAGE: DC 5V (Max 600mA)
AUDIO: 6.5M MONO (SUPPORT RUSH AGC MIC)
WEIGHT:4.5g (WITHOUT CABLE)
(TBS authorized commercial)
Short Press FREQUENCY BUTTON to change the channel, Long Press to change Band.
Short Press POWER BUTTON to change the power level, Long Press to turn PIT MODE ON/OFF
●You must connect the antenna before powering on the unit!
● 5v output is to power the camera only, Do not connect to a power inputor
battery supply, this will cause damage to the VTX!
●For the best video image, always try to keep video signal cables away from
components such as an ESC that can cause electrical interference.
7-36V DC-IN
VIDEO-IN
GND
GND
SMARTAUDIO
5V-OUT
MIC-IN
CONNECT TO FC OSD
NO OSD
BATTERY OR 7V+ BEC
BATTERY OR 7V+ BEC
FC UART TX
CAMERA
OSD VIDEO OUT
XILO STAX 5.8GHz FPV Video Transmitter
USER MANUAL
MICROPHONE