Xilinx ZCU102 Quick Start Manual Download Page 1

Page: 1 / 4

Zynq Ult MPSoC
ZCU102 Evaluation Kit

Quick Start Guide

The ZCU102 Evaluation Kit contains all the hardware, tools, and IP required to evaluate and develop your Zynq®

Ult™ MPSoC design.

This quick start guide provides instructions to set up and configure the board, run the built-in self-test (BIST), install

the Xilinx tools, and redeem the license voucher. The guide also provides a link to additional design resources

including reference design schematics, user guides, and reference designs.

ZCU102 Evaluation Kit

X-Ref Target - Figure 1-1

USB Cables

Ethernet

Cable

Power Supply

and Power

Cables

USB Hub

ZCU102

Base Board

USB Adapter

Summary of Contents for ZCU102

Page 1: ...set up and configure the board run the built in self test BIST install the Xilinx tools and redeem the license voucher The guide also provides a link to additional design resources including reference...

Page 2: ...he 6 pin power supply plug to J52 Turn on the board power with the SW1 slide switch If the three rows of Power Good LEDs glow green the power system is good If the DONE LED circled here glows green th...

Page 3: ...r pushbutton PB test The Clock BRAM PL DDR4 PS DDR4 Flash and I2C tests run without user input The DIP switch test SW13 waits for you to move all the DIP switches toward the label ON and then back The...

Page 4: ...e Vivado License Manager Under the Get License heading select Load License Click Copy License In the Select License File dialog navigate to where you saved the license file that was emailed to you in...