Getting Started with the MicroBlaze Development Kit - Spartan-3E 1600E Edition
17
UG258 (v1.3) November 30, 2007
Executing the BlueCat Linux Reference System
R
Executing BlueCat Linux Commands
This build of BlueCat Linux supports many basic Linux commands. The list of commands
and tools available to run can be found in the
/bin
directory.
The file system is read-only, except for the
/var
directory and its sub-directories. New
directories can be created under the
/var
directory using the
mkdir
command. Files
under the
/var
directory structure can be created or edited using the
vi
editor. Text files
can be viewed using the
cat
command.
This BlueCat Linux kernel was built with
networking support
enabled
,
therefore it
supports several network utilities when connected to a live network or connected directly
to a remote computer.
X-Ref Target - Figure 2-3
Figure 2-3:
BlueCat Linux Boot-Up Screen
UG25
8
_2_
3
_110507
www.BDTIC.com/XILINX
