16
KC705 Getting Started Guide
UG913 (v3.0.2) April 23, 2013
Chapter 1:
Getting Started with the Kintex-7 FPGA KC705 Embedded Kit
Reference Designs
MicroBlaze Processor BIST Subsystem
•
KC705_System
•
This is the base MicroBlaze processor subsystem including the software
applications and platforms.
MicroBlaze Processor Video Subsystem
•
Video_Demo
•
This is the MicroBlaze processor subsystem with the video cores that were run as
the power-on demonstration. Source files for the demonstration including the
software application and platform are included here.
Documentation
•
AXI Interface Based KC705 Embedded Kit MicroBlaze Processor Subsystem Data
Sheet
Documentation\ds669-axi-interface-kc705-microblaze-processor.pdf
Detailed data sheet documentation of the MicroBlaze processor subsystem, including
block diagram, address map, and system configuration.
•
AXI Interface Based KC705 Embedded Kit MicroBlaze Processor Subsystem
Hardware Tutorial
Documentation\ug914-KC705-embed-kit-microblaze-processor-subsys-hw-tutor.pdf
This tutorial guides the user through the steps to open the MicroBlaze processor
subsystem using XPS and add the cores necessary for measuring DDR3 throughput to
recreate the out-of-the-box embedded kit demonstration.
•
AXI Interface Based KC705 Embedded Kit MicroBlaze Processor Subsystem Software
Tutorial
Documentation\ug915-axi-interface-kc705-microblaze-software-tutorial.pdf
This tutorial guides the user through the steps to begin software development using
SDK (Eclipse IDE) and the MicroBlaze processor subsystem. The software tutorial
shows the user how to create stand-alone (no OS) programs from simple Hello World
designs to a more complex board test program. The tutorial also describes the software
for the video demonstration that is included with the embedded kit.
