
Install the Card
You must fit the X3522 to a 64-bit x86 server in an 8
‑
lane PCIe slot.
CAUTION! Servers contain high voltage electrical components. Before removing the server cover,
disconnect the mains power supply to avoid the risk of electrocution. Before handling computer
components, discharge static electricity from yourself by touching a metal surface, or wear a correctly
fitted anti-static wrist band.
ATTENTION! Les serveurs contiennent des composants électriques a haute tension. Avant de retirer le
capot du serveur, débranchez l'alimentation secteur pour éviter tout risque d'électrocution. Veuillez vous
déchargez de l'électricité statique en touchant une surface métallique ou portez un bracelet antistatique
correctement ajusté avant de manipuler les composants de l'ordinateur.
VORSICHT! Server enthalten elektrische Hochspannungskomponenten. Um die Gefahr eines
Stromschlages zu vermeiden, trennen Sie die Stromversorgung bevor sie das Gehäuse öffnen. Vor allen
Arbeiten an dem Server sollten sie sich zuerst elektrostatisch entladen indem Sie eine geerdete
Metalloberfläche kurz berühren oder ein passendes Antistatik-Armband tragen.
Get Details of the Card
1. If necessary, note the serial number of the X3522 (located on the card) for your own records.
For example:
5056B1085011
2. Read the MAC address QR code using a smartphone, and note it down to help identify the
card later in this install. For example:
00:0a:35:0d:91:70
Note: This is a base address. There are 16 addresses available from this base.
Locate an 8
‑
lane PCI Express Slot
The X3522 is a half height, half length, 8
‑
lane PCIe form factor card.
IMPORTANT! The X3522 requires an 8
‑
lane PCI Express slot. The card should be installed in a PCIe Gen4
or PCIe Gen3 slot.
IMPORTANT! La carte X3522 nécessite un emplacement PCI Express pour 8 lignes. La carte doit être
installé dans un slot PCIe Gen4 ou PCIe Gen3.
WICHTIG! Der X3522 Karte benoetigt einen PCI Express x16 Steckplatz. Die Karte sollte in einem PCIe
Gen4 oder PCIe Gen3 Steckplatz installiert sein.
1. Shut down the server.
Chapter 2: Card Installation
UG1522 (v1.0) October 18, 2022
Alveo X3522 Installation Guide
10