Occasionally some MC command timeouts have been seen when loading the network driver.
Reloading the network driver typically fixes this (see below for commands).
• Make sure that the network driver is loaded:
# lsmod | grep xilinx_efct
xilinx_efct 245760 0
auxiliary 16384 2 xilinx_efct,sfc_resource
• Reload the network driver:
# modprobe -r xilinx_efct
# modprobe xilinx_efct
• Examine the output of ethtool:
# ethtool <interface>
where <interface> is the first interface on the card (see
). For
example:
# ethtool enp1s0f2
• Examine the network driver information for the interface:
# ethtool -i <interface>
where <interface> is the first interface on the card. For example:
# ethtool -i enp1s0f2
• Examine the statistics for the interface:
# ethtool -S <interface>
where <interface> is the first interface on the card. For example:
# ethtool -S enp1s0f2
Known Issues
There might be late-breaking issues. Please refer to any
README
files or Release Notes in the
distribution.
for additional known issues.
Chapter 6: Troubleshooting
UG1522 (v1.0) October 18, 2022
Alveo X3522 Installation Guide
34