For example:
# ethtool -i enp1s0f2
driver: xilinx_efct
version:
<version number>
...
2. Confirm that the reported version matches the version that you downloaded and installed, as
instructed in one of the following:
•
•
Install from DKMS Debian Packages
.
Note: The actual version number might differ from the previous example.
Configure Network Settings
You must now configure the network settings for the X3522.
This section assumes that you have connected the X3522 directly to a link partner. It makes the
following settings:
• For the X3522, a static IP address of 192.168.10.10/24
• For the link partner, a static IP address of 192.168.10.20/24.
IMPORTANT! If you have instead connected the X3522 to your network, you must make different
settings that are appropriate for your network. If necessary, ask your system administrator.
IMPORTANT! Si vous avez à la place connecté la carte X3522 à votre réseau, vous devrez mettre les
paramètres adaptés à votre réseau. Si nécessaire, demandez les à votre administrateur système.
WICHTIG! Wenn Sie stattdessen den X3522 mit Ihrem Netzwerk verbunden haben, müssen Sie die
passenden Einstellungen für Ihr Netzwerk vornehmen. Fragen Sie gegebenenfalls Ihren
Systemadministrator.
Note: This section uses nmcli, but other tools can be used to make the same settings.
Create the Connection
Use the nmcli command to create a connection for the interface:
1. Get a list of network connections:
# nmcli connection show
NAME UUID TYPE DEVICE
eno1 385c33a0-1980-4721-b052-b06827f4b496 802-3-ethernet eno1
enp1s0f0 b625586a-b82c-b82f-f16c-e1bf600c7751 802-3-ethernet enp1s0f0
enp1s0f1 c133f197-d25e-a27d-acd8-cf2eda286822 802-3-ethernet enp1s0f1
virbr0 1672bdeb-3925-43d3-a559-65fdd7f7cff7 bridge virbr0
2. Look in the DEVICE column for the X3522 interface (see
).
Chapter 3: Software Installation
UG1522 (v1.0) October 18, 2022
Alveo X3522 Installation Guide
25