Install the Network Driver Binary RPM
Copy the "Wrote:" location that your server output during step
of
, and use it to install the binary network driver. For example:
# rpm -Uvh <path>/kernel-module-xilinx_efct-<os_version>-
<module_version>.rpm
Note: The network driver is not loaded at this stage. It is automatically loaded during a subsequent reboot.
Reload the Network Driver
Reload the network driver:
modprobe –r xilinx_efct
modprobe xilinx_efct
Now read
Confirm the Network Driver has Loaded
.
Install from DKMS Debian Packages
IMPORTANT! If you have chosen to install the drivers from RPM packages, omit this section.
IMPORTANT! Si vous avez choisi d'installer les pilotes à partir des packages RPM, omettez cette section.
WICHTIG! Wenn Sie die Treiber aus RPM-Paketen installiert haben, überspringen Sie diesen Abschnitt.
Requirements
DKMS must be installed on the server. If the following command returns nothing, then DKMS is
not installed. Refer to Linux online documentation to install DKMS.
# dkms --version
Determine if the Auxiliary Bus Driver is Present
X3522 cards use the auxiliary bus driver. This is provided by some recent Linux distributions. To
determine its presence, type:
# ls -d /sys/bus/auxiliary
• If there is output listing the directory, the auxiliary bus driver is already present:
/sys/bus/auxiliary
Chapter 3: Software Installation
UG1522 (v1.0) October 18, 2022
Alveo X3522 Installation Guide
22