background image

ZMi 10 power bank

Read the instructions carefully before using the device.

Safety label instructions

Each genuine portable battery has a protective label on the outside of the 

package. Please erase a special cover and enter your code at  official 

website.

The company-manufacturer: LLC «ZMI Electronic Technology»

Address: Jiangsu Province, 159 Cheng Jiang Central Road, A913.

Cautions 

• Before using the battery for the first time, fully charge it.

• When the battery is used, a display of a digital device should light up, this 

indicates a correct operation of the device.

• You can select the cable yourself to charge this battery or to charge other 

devices.

• If the LED indicators do not light up while charging the digital device, the 

battery is completely discharged. Please charge it right away.

• When the digital device is connected to the battery, the charge of this 

portable charger is being charged.

• After fully charging the battery, immediately unplug it from a power supply.

• If a short-circuit on the battery output or for other reasons the protection 

mode activates (after the LED button is pressed, the indicators do not light), 

charge it with external power supplies, and then it will return to normal 

operation.

Attention

This device is equipped with a lithium-ion battery. It is strictly forbidden 

to disassemble a case of the device, in order to prevent the battery from 

breaking.

Strictly prohibited any dismantling, squeezing, puncturing the device; It is 

USB  port input

USB  port output

also forbidden to place it in water, in a fire or expose it to a temperature 

above 60 ° C (140 ° F).

Charge level indicators

Charge level check

Mode indicators

Mode indicator: 

Double-click the charge check button to 

turn on the HUB mode. The blue indicator 

indicates a successful activation of the HUB 

mode, absence of a blue indicator indicates 

that the HUB mode is turned off.

Caution

:  «Charge level check» button is 

not designed to turn the device on / off. This 

device has a function of automatic detection 

of charging and discharging, so there is 

no need to constantly press the charge 

level check button. Two minutes before the 

discharge, the charge level indicators turn 

off. 

Summary of Contents for ZMI 10






Reviews: