Installation
Xiaomi M365PRO - wiring diagram
WARNING!
The cable does not come out of the board in the most convenient way, and when
connecting the balancing wires, you have to cross them. The thing is that initially BMS was
designed even before the PRO version of the scooter appeared on sale, after which the form
of the board was only slightly changed to maintain compatibility.
WARNING!
Follow the wiring sequence, otherwise the BMS may irreparably fail, with a loss of
warranty.
1. Connect the black power wire of the BMS and B0 balancing wire.
2. Connect the balancing wires in order,
starting with B1 and finishing with B9
.
3. Connect the red power wire of the BMS and B10 balancing wire.
4. Install temperature sensors and thermal fuse using a thermal compound or neutral sealant with thermal
grease.
5. Solder the connector that comes with the BMS to the rear light wire.
6. Connect the battery to the scooter.
7. To start the BMS for the first time, connect the charger to the scooter. In case of a successful start, the
indicator LED will blink on the board.
8
