Xhorse SK283, User Manual

Page: 14 / 48

BMW TOOL User Manual
14
Ver: 1.1
(PICTURE 5.3)

Write Key Info : Write the loaded key info to CAS system, it can use for restore
original key info
5.2. Special note in OBD
operation(Important！！！)

Under Get Key Info get window (PICTURE 5.5): For CAS3+ encrypt version, must
select add key or lost all key. For other CAS version, this 2 method is same, they
don’t have lost all key mode, add key is always
(PICTURE 5.5)

Under OBD operation get window (PICTURE 5.6):
If there’s key in ignition switch,
take away. If the key is keyless key (smart key), move it out of car. If there’s no key in
ignition, just press OK to continue