Mechanical Key Cutting Machine CONDOR XC-009
7 Maintenance
Before cutting the key, please use the brush to clean up the debris of the parts of
the processing area to avoid the impurity damage and corrosion the machine parts,
affecting the key processing accuracy.
Do not use any oily products and detergents to clean all parts of the machine to
avoid damage or corrosion the machine parts.
Do not wash machine and parts with water directly, do not wipe the machine with
wet cloth, in case of leakage of machine or rust of metal parts
In order to avoid the debris blown into the machine inside, causing safety
problems
，
please do not use air guns, hair dryers and other cleaning equipment
cleaning processing area.
8 Quality assurance and after-sales instructions
CONDOR XC-009 warranty period is one year, subject to the date on the
transaction voucher, if no transaction voucher or transaction voucher is lost, the factory
record date shall prevail.
The following conditions are not free warranty
：
Failure to use the instructions as required
Machine damage caused by self repair or modification
Machine failure due to drop, collision or improper voltage
Machine damage caused by force majeure
Used for a long time in harsh environments or on vehicles or ships, causing
machine malfunctions or damage.
The normal use of the machine causing the daily wear.
