FusionServer 1288H V5 Server
Technical White Paper
5 Hardware Description
2023-02-28
44
Indicator Description
Table 5-17
LOM indicators
Indicator
Description
Connection status
indicator/Data
transmission status
indicator for a 10GE
optical port
⚫
Off: The network port is not connected.
⚫
Blinking green: Data is being transmitted.
⚫
Steady green: The network port is properly connected.
Data transmission rate
indicator for a 10GE
optical port
⚫
Off: The network port is not connected.
⚫
Steady green: The data transmission rate is 10 Gbit/s.
Connection status
indicator/Data
transmission status
indicator for a 10GE
electric port
⚫
Off: The network port is not connected.
⚫
Blinking green: Data is being transmitted.
⚫
Steady green: The network port is properly connected.
Data transmission rate
indicator for a 10GE
electrical port
⚫
Off: The network port is not connected.
⚫
Steady green: The data transmission rate of the link is
10 Gbit/s.
⚫
Steady yellow: The data transmission rate of the link is
1 Gbit/s.
Connection status
indicator of a GE
electrical port
⚫
Off: The network port is not connected.
⚫
Steady green: The network port is properly connected.
Data transmission
status indicator of a GE
electrical port
⚫
Off: Inactive.
⚫
Steady yellow: Active, but no data is being transmitted.
⚫
Blinking yellow: Data is being transmitted.
5.6.2 FlexIO Cards
FlexIO cards provide network expansion capabilities.
⚫
The FlexIO card (with electrical ports) cannot be connected to power over
Ethernet (PoE) devices (such as a switch with PoE enabled). Otherwise, link
communication failure or even damage to the FlexIO card may be caused.
⚫
Contact your local sales representative or use the
determine the components to be used.
⚫
When IB cards are used to build an IB network, ensure that the IPoIB modes of
the IB cards at both ends of the network are the same. For details, contact
technical support.
