FusionServer 1288H V5 Server
Technical White Paper
5 Hardware Description
2023-02-28
54
11
PCIe riser 1 slot
(corresponding to CPU
1/J108)
12
SATA signal connector 2
(SATA2/J71)
13
SATA signal connector 1
(SATA1/J67)
14
Mini SAS HD connector B
(MINIHD PORT B/J84)
15
Mini SAS HD connector A
(MINIHD PORT A/J86)
16
USB 3.0 port (FRONT
USB3.0/J173)
c
17
Front panel connector
(RCIC/RCIF/RCIG
BOARD/J167)
18
TPM/TCM port (TPM
CONN/J55)
19
VGA connector (VGA
BOARD/J160)
20
Fan 7 connector (1U
FAN7/J144)
21
Fan 6 connector (1U
FAN6/J142)
22
Fan 5 connector (1U
FAN5/J143)
23
Fan 4 connector (1U
FAN4/J102)
24
Fan 3 connector (1U
FAN3/J103)
25
Fan 2 connector (1U
FAN2/J104)
26
Fan 1 connector (1U/2U
FAN1/J105)
27
Drive backplane connector
(HDD BP CONN/J162)
28
Drive backplane power
connector 1 (HDD BP
PWR1/J128)
29
CPU2 slimline A connector
(CPU2 SLIMLINE A/J140)
30
CPU2 slimline B connector
(CPU2 SLIMLINE B/J139)
31
PSU 2 connector (J157)
32
PSU 1 connector (J156)
33
RTC battery (CMOS
BATTERY/U4042)
34
Jumper (J176)
d
35
I/O NIC connectors (IO
BOARD/J159/J158)
36
Screw-in RAID controller
card connector (RAID
CARD/J48)
37
PCIe riser 2 slot
(corresponding to
CPU2/J155)
-
-
⚫
a:"10GE optical port" corresponds to the mainboard (BOM: 03024AFS and
03029JRW) integrated with two 10GE optical ports and two GE electrical ports.
"10GE electrical port" corresponds to the mainboard (BOM: 03024CXR and
03029JRV) integrated with two 10GE and two GE electrical ports.
⚫
b:The port is reserved.
⚫
c:The built-in USB 3.0 port cannot be used directly. If you want to use it, use a
USB cable to connect it to the front USB 3.0 port.
⚫
d:COM_SW(ON) is used to change the connection direction of the physical
serial port. BMC_RCV(ON) is used to restore the default iBMC configuration (for
iBMC V350 and later versions, restoring the default iBMC configuration through
a jumper is not supported).
