3
◆
Quick Using
1)
Inset GSM card, connect GPS GSM antennas and external power supply.
2)
Put GPS antenna outside, around 30s blue light will keep stable on and with red light flash at 2 seconds,
means device can start normal working.
3
）
Make a call to device number or send SMS “google” to device number, it will reply a tracking message show
location.
4
）
if need real time tracking on computer, please send 2 SMS commands connect to platform as below:
SMS 1: ip58.64.200.27port6780
SMS 2: apspace+APN of operator
SMS 3: user+space+ APN user name+space+APN password
（
if no APN user name and prd, skip this
）
SMS 4: latter 11 digits of device IMEI number(also can use device GSM card number)
5
）
login tracking platform to check real time location( please contact your supplier)
◆
GPS Vehicle Tracker Installation
GPS tracker should be installed by technical professional of local service centre. Without permission, the
user cann’t repair and move the tracker randomly. If users do, any unfortunated damage should be compensated
by himself.
Installation steps (caution: the following installation should under no power, otherwise will be dangerous)
1. Install GPS and GSM antennas:
GPS antenna can’t cover with metal. (necessary)
2 . Power supply line:
The red wire connects 12V
“
+”;Black wire connects to 12V
“
-” (necessary)
2. Device light status:
Red represents GSM signal, blue represents GPS signal, when blue light stable lighting on and flash with red
light at 2 seconds (red and blue is same light ).
3. Wire for cutting off oil or circuit of the tracker
(optional connect)
Relay white wire connects positive +;
relay yellow wire connects device yellow wire; two green wires
connect Oil pump or circuit two ends. Caution: Wrong connection of yellow wire will damage the tracker.
4. Emergency triggering alarm
(optional connect)
The blue wire connects the positive of the alarm button, and the black wire connects the negative of the alarm
button.