10
17. Set country time zone
In the default, tracker reply position SMS time is UTC time. After you can set zone time, tracker will reply the
time of your country. The format is “
zone + pa space + time zone value
”. For example, “zone123456
8” is set east 8 time zone. Time zone value ranges from -12 to 12. One time zone stands for one hour.
“zone123456 -8” is set west 8 time zone. After send SMS, tracker will reply “Set Time Zone OK.”
18. Modes switch between “track” and “monitor”
The default mode is “track”. Send SMS “
m password
” to the unit, and it will reply “monitor ok!” and
switch to “monitor” mode. For example send SMS: “monitor123456”. In this mode, you can monitor tracker by
call tracker card number.
Send SMS “
tracker + password
” to the unit, it will reply “tracker ok!” and restore to “track” mode. For
example send SMS “tracker123456”. In this mode, you can get position SMS by call tracker.
19. Modes switch between “telephone” and “web”
Set up: Send SMS “
web + password
” to device. For example, the password is 123456. Send SMS
“web123456” to the device, the device will reply SMS “set web ok”. After this, the tracker will report the GPS
data to IP address.
If you want to send GPS data to telephone, you can send SMS “
tel password
” to device, the device
will reply “set telephone ok”. And then, the device will send GPS data to your telephone by SMS. (The default
is sending the GPS data to the telephone)
20. Modify IP address and port
The IP address and port of the tracker can be modified and transferred data to other platform. Send SMS
“
IP +
ip a PORT + port value”
to the unit. If the platform’s IP address and port is 58.64.200.27 and 8169,
send SMS “ip58.64.200.27port8169” to the tracker. It will reply “set IP address and PORT ok.”. After this,
device will send GPS data to this IP and Port.
21. Set Device ID number
This command uses only for GPRS communication. Default device ID is the same. In order to identify device
for platform, must set device ID for every device. Send SMS
“
tracker ID number”
to the tracker.
For example
“number13612345678”.
22. Set APN
In order to send GPS data to
IP address, you still must set mobile network Access Point Name (APN). If you
don’t know the APN, you can consult local network service supplier. The format of set APN is
“APN +
paspace + apn value”
. For example you send SMS “apn123456 cmnet” to the device. The device
will reply SMS “Set APN ok.” .
23. Set GPRS user name and password
Some country must be set GPRS user name and password for GPRS communication. The format of set GPRS
user name and password is “
user + space + GPRS user name + space + GPRS password
”. For example,
“user name 123456”, “user” is command, “name” is GPRS user name, “123456” is GPRS password. After send
SMS, tracker will reply “Set GPRS User and Password ok . ” .