8
5.8 Auto-Track
Report a Geo-info at 30s intervals to the authorized numbers for 5 times:
5.8.1
Setup: Send SMS t0password to the unit, it will report the Geo-info at
30s intervals for 5 times.(s: second, m: minute, h: hour). The setting must be in 3 digits
and at maximum 255 in value.
5.8.2
Send SMS t030s***n+password to the unit, it will reply SMS heaps of times
5.8.3
Cancel: Send notn+password to delete the “ auto track ”
Remark:
the interval must not be less than 20s.
5.9 Monitoering Mode(Voice Surveillance)
In this mode, the user can dial up the unit to hear the voice around the tracker after your
call.(please refer to
5.10
for instruction).
5.10 Modes switch between “track” and “monitor”
5.10.1
.
The default mode is “track”.
5.10.2
.
Send SMS password to the unit, and it will reply “monitor ok!” and
switch to “monitor”mode.
5.10.3
.
Send SMS password to the unit, it will reply “tracker ok!” and restore to
“track” mode.
5.11 Geo-fence
Set up a geo-fence for the unit to restrict its movements within a district. The unit will
send the message to the authorized numbers when it breaches the district.
5.11.1
Setup: When the unit stays immobile in a place for 3-10 minutes, the user can
Send SMS spspace+latitude,longitude; latitude,longitude to unit to