Xerox WorkCentre XK50cx, Service Manual

Page: 22 / 109

3-15
Disassembly and Reassembly
1. Before you disassemble the main cover, you
should remove:
Rear cover (See page 3-2)
ADF Scanner unit assembly (See page 3-3)
Control Panel assembly (See page 3-9)
2. Remove two screws securing the main cover to
the main frame and unplug one connector from
the main PBA.
3. Pull the bottom ends on both sides apart to
unlatch the cover from the main cover,
then lift it up.
3-13 Main Cover
3-14 Engine Unit
1. Before you disassemble the engine unit,
you should remove:
All covers (See page 3-2, 3-9)
ADF Scanner unit assembly (See page 3-3)
2. Remove the three screws securing the engine
unit, and unplug all the connectors from the main
PBA.
3. Take out the engine unit from the cover bottom.