Paper and Media
Loading Paper in Trays 1–4
1.
To remove the tray from the printer, pull out the tray until it stops, lift the front of the tray slightly,
then pull it out.
2.
At the back of the paper tray, press the paper lift tray down until it locks.
3.
Adjust the paper length and width guides as illustrated.
4.
Flex the sheets back and forth and fan them, then align the edges of the stack on a level surface.
This procedure separates any sheets that are stuck together and reduces the possibility of jams.
5.
Load paper into the tray.
−
Load hole punched paper with the holes to the right.
−
Load labels in the tray, face up.
−
For 1-sided and 2-sided printing, load letterhead or pre-printed face down with the top edge
going into the printer.
Xerox® WorkCentre® 3655 Multifunction Printer
57
User Guide
