Copying
102
Xerox
®
WorkCentre
®
6655/6655i Color Multifunction Printer
User Guide
Basic Copying
1.
To clear previous settings, press the yellow
Clear All
button on the control panel.
2.
Load your original documents:
−
Use the document glass for single pages or paper that cannot be fed using the document
feeder. Place the first page of the document face down, in the top left corner of the document
glass.
−
Use the document feeder for multiple or single pages. Remove any staples and paper clips from
the pages and place them face up in the document feeder.
3.
Press the
Services Home
button, then touch
Copy
.
4.
Use the alphanumeric keypad on the control panel to enter the number of copies. The number of
copies appears in the upper right corner of the touch screen.
Note:
To correct the number of copies entered using the alphanumeric keypad, press the
C
button,
then re-enter the number.
5.
Change the copy settings as needed. For details, see
Selecting Copy Settings
on page 104.
6.
Press the green
Start
button.
Notes:
•
To pause or cancel a copy job, press the red
Stop
button on the control panel.
•
To interrupt a copy job, press the
Interrupt
button on the control panel.
•
On the touch screen, touch
Resume Scanning
to continue the job, or
Cancel Scanning
to cancel
the job completely.
Document Glass
•
Lift the document feeder cover and place the
first page face down in the upper left corner of
the document glass.
•
Align the originals to the matching paper size
printed on the edge of the glass.
•
The document glass accommodates original
sizes up to 216 x 356 mm (8.5 x 14 in.).
