Maintenance
Performing a Paper Registration Adjustment
1.
At the printer control panel, press the
Home
button.
2.
Log in as administrator. For details, refer to
Logging In as the Administrator
on page 265.
3.
Touch
Device
>
Support
>
Image Position
.
4.
To adjust registration, select the source paper tray.
a.
Touch
Paper Supply
.
b.
Touch the desired tray.
5.
Using the chart printed in Verifying Paper Registration, select the side for registration.
a.
For adjusting Side 1, touch
Adjusted Side
, then touch
Side 1
.
b.
For adjusting Side 2, touch
Adjusted Side
, then touch
Side 2
.
6.
To adjust the registration, touch
Lead/Side Registration
.
a.
To adjust the side-to-side registration, for
Side Registration
, touch Plus (
+
) or Minus (
-
).
b.
To adjust the top-to-bottom registration, for
Lead Registration
, touch Plus (
+
) or Minus (
-
).
For reference, position the chart so that Side-1 or Side-2 dots are at the bottom of the page.
•
For Lead Registration, a positive value shifts the image down the page.
•
For Side Registration, a positive value shifts the image to the left.
7.
To save your settings, touch
OK
.
8.
As needed, repeat steps 4 through 6 to enter additional values.
9.
Print another sample page, then repeat the process until you complete the registration corrections.
10.
To return to the Home screen, press the
Home
button.
Xerox
®
WorkCentre
®
6515 Color Multifunction Printer 179
User Guide
