Xerox WorkCentre 6400, User Manual

Page: 50 / 248

Printing
WorkCentre 6400 Multifunction Printer
User Guide 50
Trays 2, 3, or 4 accept a maximum of 500 sheets of plain paper (20 lb. Bond).
To load paper or other media in Tray 2, 3, or 4:
1. Extend the tray from the printer.
2. Adjust the paper guides to fit the paper (if necessary).
• Tray 2 :
Length guide : Compress the sides of the guide and lift the guide from the tray. Insert the guide in
the holes in the tray so that the guide is aligned with the appropriate paper size (imprinted on the
bottom of the tray), and release the sides.
Width guides : Press the tab extending from the top of the guide and move the guide so that the
mark on the guide aligns with the paper size imprinted on the tray. Repeat for the other guide.
•
Tray 3 or 4 :
Length guide : Press the green sides of the guide, then slide the guide until the arrow on the guide
points to the appropriate paper size imprinted on the bottom of the tray. When properly
positioned, the guide clicks into place.
Width guides : Press the green lever on the side of the guide, and move the guide so that it is
aligned with the appropriate paper size imprinted on the paper lifting plate.
3. Press down on the paper-lifting plate until it locks into place.
6400-037
6400-038