Installation and Setup
Xerox
®
WorkCentre
®
6027 Multifunction Printer
51
User Guide
Changing the IP Address Using the Installer with USB
1.
From your installer disk, click
Setup Printer and Install Software
.
2.
At the License Agreement, select
I Agree
, then click
Next
.
3.
On the Select a Connection Method screen, click
Wireless
.
4.
On the Select a Wireless Setup Method screen, click
Search for Networks
.
5.
Ensure that the USB cable is connected properly.
6.
Select a network, then click
Next
.
7.
Enter the passphrase for your wireless network, then click
Next
.
8.
For the Configure Printer screen, click
Advanced
.
9.
For the IP Address Settings screen, modify the settings as needed then, click
Next
.
10.
At the prompt, remove the USB cable from the printer, then click
Next
.
11.
In the printer list, select your printer.
12.
In the Software and Documentation window, clear the check box for any undesired options.
13.
Click
Next
.
14.
To complete the installation, click
Finish
.
Enabling the Printer for Scanning
If the printer is connected to a network, you can scan to an FTP address, an email address, or a shared
folder on your computer. First you must set up scanning in CentreWare Internet Services. For details, see
CentreWare Internet Services
on page 27.
If the printer is connected with a USB cable, you can scan to a folder on your computer, or scan into an
application. First you must install the scan drivers and the Express Scan Manager utility.
Note:
If your printer is connected using the USB cable, you cannot scan to an email address or a
network location, such as a shared folder on your computer.
For details, see
Scanning Setup Overview
on page 77.
