Installation and Setup
Xerox
®
WorkCentre
®
6027 Multifunction Printer
45
User Guide
Adding the Printer
For networking, set up your printer using Bonjour (Rendezvous), or connect using the IP address of your
printer for an LPD/LPR connection. For a non-network printer, create a desktop USB connection.
To add the printer using Bonjour:
1.
From the computer Applications folder or from the dock, open
System Preferences
.
2.
Click
Print & Fax
.
The list of printers appears on the left of the window.
3.
Click the plus button (
+
) under the list of printers.
4.
Click the
Default
icon at the top of the window.
5.
Select your printer from the list and click
Add
.
Note:
If your printer was not detected, verify that the printer is on and that the Ethernet or USB
cable is connected properly.
To add the printer by specifying the IP address:
1.
From the computer Applications folder or from the dock, open
System Preferences
.
2.
Click
Print & Fax
.
The list of printers appears on the left of the window.
3.
Click the plus button (
+
) under the list of printers.
4.
Click
IP
.
5.
From the Protocol drop-down menu, select the protocol.
6.
In the Address field, enter the IP address of the printer.
7.
In the Name field, enter a name for the printer.
8.
From the Print Using drop-down list, choose
Select a driver to use
.
9.
Select the print driver for your printer model from the list.
10.
Click
Add
.
Now you can print and scan. For details, see
Printing
on page 127 and
Scanning
on page 93.
See also:
Online Support Assistant at:
www.xerox.com/office/WC6027support
Utilities
The Address Book Editor and Express Scan Manager are installed automatically when you install the scan
driver. For details, see
Installing the Drivers and Utilities for Macintosh OS X Version 10.5 and Later
on
page 44.
