Xerox WorkCentre 5945, User'S Manual And Warranty

Page: 509 / 722

Print WorkCentre
®
5945/5955
User Guide 507
12. Print jobs are usually shown in the Active Jobs list, however if your System Administrator has
enabled the Hold All Jobs feature, your job will be listed in either the Held Print Jobs or the
Unidentified Print Jobs list. To release a held job select the job in the required list and then
select the
Release button.
13. If your job remains held in the Active Jobs list, the device needs you to supply additional
resources, such as paper or staples before it can complete the job. To find out what resources
are needed, select the job and then select the
Details button. Once the resources are available
the job will print.
More Information
Printing a Document using the Mac Print Driver
System Administrator Guide www.xerox.com/support.
Using Internet Services to find System Administrator Contact Details
Printing a Sample Set Job using the Mac Print Driver
Viewing the Progress and Details of a Job using the Job Status Menu
Print From
Printing a Saved Job using the Print From Feature
The Print From feature prints jobs which have been saved on the device or on a USB stick. This is a
useful feature if you have documents that you need to print regularly.
Note: This option must be made available by your System Administrator.
If Authentication or Accounting has been enabled on your device you may have to enter login
details to access the Print From feature.
Use Print From Saved Jobs to print jobs which have been saved in a folder on the device using the
Saved Jobs feature.
Saved Jobs are documents that are sent to the device and stored there for future use. Saved jobs
can be accessed and printed at the device and from Internet Services.
1. Press the Clear All button on the control panel to cancel any previous programming selections.
2. Press the Services Home button.
3. Select the Print From... button on the touch screen.
4. Select the Saved Jobs... button.
5. Select the folder required.
6. Select the saved job required.
7. Select any options required.
8. Select the Paper Supply button.
9. Select the Paper Supply option required.
• Automatically Select lets the device select the appropriate paper size for each original
based on the size of the original and reduce or enlarge programming.
• Select a paper tray that contains the size and type of paper you require. The size and media
loaded in each tray is displayed.
10. Select the OK button.
11. Select the 2-Sided Printing button.