Xerox WorkCentre 3655 User Manual Download Page 56

Page: 56 / 264

Paper and Media

Xerox

WorkCentre

3655/3655i Multifunction Printer

User Guide

Adjust the width guides until they touch the edges of the paper.

If the control panel prompts you, verify the paper size, type, and color in the Paper Settings screen.

Loading Small Paper Sizes in the Bypass Tray

Open the bypass tray.

Note:

To simplify loading paper in the bypass tray, remove the tray from the printer.

To remove the bypass tray from the printer, pull the tray straight out of the printer.

If the bypass tray is loaded with paper already, remove any paper that is a different size or type.

Summary of Contents for WorkCentre 3655









































































































































































































































































Search results

Summary of Contents for WorkCentre 3655

Reviews:

Related manuals for WorkCentre 3655

Brands by name

Popular brands

Xerox WorkCentre 3655, User Manual

Search results

Summary of Contents for WorkCentre 3655

Reviews:

Related manuals for WorkCentre 3655

Brands by name

Popular brands