Xerox WorkCentre 3655 User Manual Download

Page: 203 / 264

Troubleshooting

Xerox

WorkCentre

3655/3655i Multifunction Printer 203

User Guide

Printer Fails to Print

Probable Causes

Solutions

The printer has an error.

•

To clear the error, follow the onscreen prompts.

•

Turn off the printer, then turn it on again. If the error persists,

contact your Xerox representative.

The printer is out of paper.

Load paper into the tray.

A toner cartridge is empty.

Replace the empty toner cartridge.

The front door is open.

•

Ensure that the toner cartridge and Smart Kit drum cartridge are

installed and fully seated.

•

Ensure that the door is closed completely.

•

Turn off the printer, then turn it on again. If the error persists,

contact your Xerox representative.

The power cord is not correctly plugged into

the outlet.

Turn off the printer, confirm that the power cord is plugged in

correctly to the printer and the outlet, then turn on the printer. For

details, see

Turning the Printer On and Off

on page 37. If the error

persists, contact your Xerox representative.

The printer is busy.

•

A previous print job could be the problem. On your computer,

you can use the printer properties to delete all print jobs in the

print queue.

•

Load the paper in the tray.

•

At the control panel, touch

Job Status

. If the print job does not

appear check the Ethernet connection between the printer and

the computer.

•

At the control panel, touch

Job Status

. If the print job does not

appear, check the USB connection between the printer and the

computer. Turn off the printer, then turn it on again.

The printer cable is disconnected.

•

At the control panel, touch

Job Status

. If the print job does not

appear check the Ethernet connection between the printer and

the computer.

•

At the control panel, touch

Job Status

. If the print job does not

appear, check the USB connection between the printer and the

computer. Turn off the printer, then turn it on again.

Printer Makes Unusual Noises

Probable Causes

Solutions

There is an obstruction or debris inside the

printer.

Turn off the printer and remove the obstruction or debris. If you

cannot remove it, contact your Xerox representative.

The Smart Kit Drum Cartridge is not fully

seated.

Remove and reseat the Smart Kit Drum Cartridge.

Summary of Contents for WorkCentre 3655









































































































































































































































































Search results

Summary of Contents for WorkCentre 3655

Reviews:

Related manuals for WorkCentre 3655

Brands by name

Popular brands

Xerox WorkCentre 3655, User Manual

Search results

Summary of Contents for WorkCentre 3655

Reviews:

Related manuals for WorkCentre 3655

Brands by name

Popular brands