Xerox WorkCentre 3655 User Manual Download

Page: 197 / 264

Maintenance

Xerox

WorkCentre

3655/3655i Multifunction Printer 197

User Guide

Moving the Printer

WARNINGS:

•

To prevent dropping or tipping the printer, hold the printer between two people, with each

person using one hand underneath to hold the printer and the other hand on top to stabilize it.

•

If the optional 550-Sheet Feeder is installed, uninstall it before you move the printer. If the

optional 550-Sheet Feeder is not fixed to the printer securely, it could fall to the ground and

cause injury.

Follow these instructions when moving the printer:
1.

Turn off the printer and disconnect the power cord and other cables from the back of the printer.

For details, see

Turning the Printer On and Off

on page 37.

WARNING:

To prevent electric shock, never touch the power plug with wet hands. When removing

the power cord, ensure that you pull the plug and not the cord. Pulling the cord can damage it, which

can lead to fire or electric shock.

Remove any paper or other media from the output tray.

If the output tray extension is extended, close it.

Remove the paper from the paper tray.
Keep the paper wrapped and away from humidity and dirt.

Summary of Contents for WorkCentre 3655









































































































































































































































































Search results

Summary of Contents for WorkCentre 3655

Reviews:

Related manuals for WorkCentre 3655

Brands by name

Popular brands

Xerox WorkCentre 3655, User Manual

Search results

Summary of Contents for WorkCentre 3655

Reviews:

Related manuals for WorkCentre 3655

Brands by name

Popular brands