Xerox Wide Format 6705 System, User Manual, Page: 99 / 363

Copy
2
99
2.12 [Copy (Auto Mode)] Screen
2.12.1 Original Orientation (Specifying the Document Feeding Orientation)
The following describes how to tell the machine the orientation in which the document is placed.
For each of the document orientations (Standard Portrait, Standard Landscape, and Synchronized), the mapping
table between original sizes and paper sizes (Matrix) can be predefined.
Steps
St
1.
Select the original orientation.
Standard Portrait
Select this when loading standard size documents in the
portrait orientation.
Standard Landscape
Select this when loading standard size documents in the
landscape orientation.
Synchronized
Select this when loading non-standard size documents.
Note

Image rotation is not applied.
2.12.2 Mapping Table between Original Sizes and Paper Sizes (Matrix)
This following describes how to select the target paper size corresponding to the original size.
In Auto Mode, the machine automatically selects the appropriate magnification ratio and the paper tray according
to the scanned original, based on the predefined mapping table between original sizes and paper sizes (Matrix).
Steps
St
1.
Select the target paper size corresponding to the original
size from the matrix.