Xerox Wide Format 6705 System, User Manual, Page: 43 / 363

Before Using the Machine
1
43
1.5 [Services Home] Screen
 Language
Allows you to select the display language.
This language setting is reset once the machine is turned off.
Important

When you select English as the display language and entries such as Address Name contain characters other
than ASCII, they may not be displayed appropriately.
Note

The initial default language, which is displayed on the touch screen when the power is switched on, can be
selected in [Default Language] under [System Settings]. For information on how to do this, refer to "Default
Language" (p. 292).
 Scan Sensor Gap Calibration
Allows you to calibrate the gap between scanning sensors with the calibration chart.
Note

For more information, refer to "Calibrating the Scan Sensor Gap" (p. 57).
1.5.1 Adjusting Screen Brightness
You can adjust the brightness of the touch screen.
Steps
St
1.
Press [Screen Brightness] on the [Services Home] screen.
2.
Press [+] or [-] to adjust the screen brightness.
3.
Press [Close].