Xerox Wide Format 6705 System, User Manual, Page: 152 / 363

3
Scan
3.10 Scan - [Advanced Settings] Screen
152
3.10.1 Image Options (Adjusting the Scan Density, and Sharpness and
Contrast of Images)
The following describes how to adjust the scan density, and sharpness and contrast of images, when running a scan
job.
Steps
St
1.
Press [Image Options].
2.
Make adjustments for the desired items.
Lighten / Darken
Select from nine scan density levels between [Lighten] and
[Darken].
To increase the density level on the scanned output, select a
level closer to [Darken]. To decrease the density level, select
a level closer to [Lighten].
Sharpness
Select from five sharpness levels between [Sharpen] and
[Soften].
To enhance edges on the copied output, select a level closer
to [Sharpen]. To soften edges, select a level closer to [Soften].
Contrast
Select from five contrast levels between [More] and [Less].
To increase the difference between light and dark areas, or to make the darker areas darker and the lighter areas
lighter, select a level closer to [More]. To decrease the difference between light and dark areas, select a level closer
to [Less].