Xerox Wide Format 6705 System, User Manual, Page: 111 / 363

Copy
2
111
2.14 Copy - [Image Quality] Screen
2.14.4 Threshold Sort (Classifying Halftones on the Document)
Use these steps to select whether to reproduce halftones on the document by using pseudo-halftoning or by
classifying halftones via binarization.
In general, halftones on documents are reproduced by using pseudo-halftoning method. You can select [On] under
[Threshold Sort] to choose classifying halftones via binarization.
Steps
St
1.
Press [Threshold Sort].
2.
Select [Off] or [On].
Off
Halftones on documents are reproduced on copied output
with pseudo-halftoning.
On
Halftones are reproduced on copied output by classifying
halftones via binarization.
You can set the threshold for classifying halftones to black or
white.
2.14.5 Adjust Color Density (Adjusting Density Level for Individual Colors)
The following describes how to adjust density level of a color in order to enhance or suppress the color.
Note

The Color Board & Page Memory for IIT is required to use this feature.
Steps
St
1.
Press [Adjust Color Density].
2.
Adjust the density level of individual colors.
Adjust
Select this check box to adjust the density level of individual
colors.
There are nine levels of density available for each of the
following colors: red, yellow, green, cyan, blue, magenta, and
black.
(Disabling a color)
Select the check box for a color to eliminate it from the
copied output.